Miele DA 420 V EXT User Manual download pdf (Page 21)

^

After cleaning, leave the filters to dry

on an absorbent surface before

replacing them.

^

When removing the filters for

cleaning, also clean off any residues

of oil or fat from the now accessible

housing to prevent the risk of these

catching fire.

When putting the grease filters back in

position, ensure that the locking clips

are facing down towards the hob.

If the grease filters are inadvertently

replaced upside down, insert a small

screwdriver blade into the slits to

disengage the clip.

^

After replacing the grease filters,

press the grease filter touch control

for approx. 3 seconds to re-set the

operating hours counter.

The indicator lamp will go out.

If the grease filters are cleaned before

the operating hours counter has

reached its maximum, the grease filter

touch control should be pressed for

approx. 6 seconds to reset the counter.

Fitting and replacing the

charcoal filter

If the cooker hood is connected for

recirculation, a charcoal filter must be

inserted in addition to the grease filters.

It is designed to absorb cooking

odours.

It is fitted in the canopy above the

grease filters.

New filters can be purchased from

your Miele dealer or from the Miele

Spare Parts Department.

See back cover for contact details,

and "Technical data" for the model

number of the filter.

^ Before fitting or replacing a charcoal

filter, the grease filters must first be

taken out (see previous section for

instructions on how to do this).

^

Take the charcoal filter out of its

packaging.

^

Insert the charcoal filter into the

canopy. The tab for removing it

should be at the front.

When fitting for the first time:

^

Set the operating hours counter to

suit your requirements (see

"Operation").

Cleaning and care

21

1 ... 20 21 22 ... 36

Comments to this Manuals

No comments