Miele G 7804 Operations Instructions download pdf (Page 37)

3. Venting and setting the

dosage on "DOS modules G 60

and C 60" (optional extra)

^

Set the dosage selector on the

DOS-Module to position 10 (applies

to DOS Module C 60 only).

^

Turn the programme selector to the

STOP position f.

^

Switch off the machine.

^

Press 4 and 6 at the same time,

hold them in and, whilst doing so,

switch the machine on with the I-0

button.

The current programme status "P..."

will show in the display.

The indicator light p / 6 will come

on.

^ Press 3 twice, E02 for programming

level 2 will appear in the display.

Venting the dispensing system:

^ Turn the programme selector to the A

position. "do1" appears in the display.

^

Press 4.

The dispensing system will be vented

automatically. Venting takes 90

seconds and when completed, a "0"

appears in the display.

If only venting

is required:

^

Switch the machine off with the I-0

button.

^

Immediately after this start the

PRE-RINSE D programme, so that

after venting any agents in the wash

cabinet are diluted before being

drained away.

Setting the dosage:

Set the amount to dispense

according to the detergent

manufacturer’s recommendations.

The machine needs 9.5 litres of water in

the main wash stage of the programme.

Example:

A manufacturer recommends 4 ml

cleaning agent per litre of water:

9.5lx4ml/l = 38 ml.

2ml. 1 second dispensing time; i.e.

programming to 19 seconds.

^ Turn the programme selector to the B

position, the dispensing time in

seconds appears in the display, e.g

“10”.

^ Press 4 repeatedly or hold it in, until

the number “19” appears in the

display (dispensing time 19 seconds

. 38 ml - see example - ).

The dispensing time/amount is set.

Having changed a value or all values:

^

Press the 6 button. SP appears.

^

Press 6 again. The change has

been recorded.

Value set:

If the dispensing system also needs to

be vented:

^

Start the PRE-RINSE programmeD,

so that after venting any agents in the

wash cabinet are diluted before

being drained away.

Programming special functions

37

1 ... 36 37 38 ... 60

Comments to this Manuals

No comments