Miele Kit for Vi models User Manual download pdf (Page 17)

It is possible to set the exact

temperature individually in each zone.

The zones are set up ex works to store

red wine, white wine and for long-term

storage.

The settings can be altered to your

requirements.

^

Touch the sensor for the zone you

wish to change so that it is

highlighted in yellow.

^ The temperature inside the appliance

can be selected by touching the

arrow sensors on either side of the

temperature display.

The temperature set at the factory for

the zone concerned is highlighted in

yellow.

By touching the

X sensor: the temperature will get

colder

Y sensor: the temperature will get

warmer.

–

Touching the sensor once:

adjusts the temperature shown in

1 °C steps.

–

Keeping your finger on the sensor:

changes the temperature

continuously.

If the highest or lowest temperature that

it is possible to set is reached, the X or

Y sensor will disappear from the

display.

The temperature display in the

control panel always shows the

required temperature.

Once you have altered the temperature,

check the temperature after a few

hours. It will take this long for the

appliance to reach the temperature. If,

after this time, the temperature is still

too high or too low, you will need to

adjust it again.

Temperature ranges for each of the

zones

– Upper zone:

3°Cto18°C

– Middle zone:

3°Cto18°C

– Lower zone:

8°Cto18°C

The ideal temperature and humidity level

17

1 ... 16 17 18 ... 64

Comments to this Manuals

No comments