Miele 28659650USA Operations Instructions download pdf (Page 28)

Cleaning and care

After cleaning

 After cleaning, leave the filters on an

absorbent surface to dry.

 When removing the panels and

grease filters for cleaning, also clean

off any accessible oil or grease

buildup from the housing. Doing so

will prevent a fire hazard.

 Reinstall the grease filters. When

inserting the filters, make sure that

the locking clip is facing down.

 If the filters have been installed

incorrectly, you can insert a small

screwdriver into the slit to disengage

the locking clip.

 Hook the panels onto the support

rod.

 Lift up the front of the panels and

push them into the lock until they

engage.

Resetting the filter saturation counter

for the grease filters

Once cleaning is complete, the filter

saturation counter must be reset.

 While the fan is turned on, press the

filter saturation indicator  for

approx. 3 seconds until 1 is the only

indicator flashing.

The grease filter symbol  goes out.

When cleaning the grease filters before

the full operating time has elapsed:

 Press the filter saturation indicator

 for approx. 6 seconds until 1 is

the only indicator flashing.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

No comments

Miele 28659650USA Operations Instructions Page 28