Miele DA 270-4 User Manual download pdf (Page 25)

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer can

not be held responsible for

unauthorized work.

Ensure that power to the appliance

is OFF while installation or repair

work is performed.

Verify that the voltage, load and

circuit rating information found on the

data plate (located behind the

grease filter), match the household

electrical supply before installing the

hood.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or call Miele’s

Technical Service Department. See

back cover for contact information.

WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Important

To increase security before the

machine is installed, it is

recommended to install a protective

switch (30 mA).

Important

The hood must be hard wired

accordingly:

Black/Red wire:. . . . connect to L1 (live)

White wire: . . . . . connect to N (neutral)

Green wire: . . connect to GND (ground)

Maximum load. . . . . . . . . . . . . . . 450 W

Fan. . . . . . . . . . . . . . . . . . . . . . . 350 W

Lighting . . . . . . . . . . . . . . . . . 4 x 20 W

Indirect Lihting. . . . . . . . . . . . 2 x 10 W

Voltage . . . . . . . . . . . . . . . . . . . . . 120 V

Frequency . . . . . . . . . . . . . . . . . . 60 Hz

Circuit rating. . . . . . . . . . . . . . . . . . 15 A

Electrical data

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Miele DA 270-4 User Manual Page 25

Comments to this Manuals

Related products and manuals for Cooker hoods Miele DA 270-4