Miele DA 5496 W EXT Service Manual download pdf (Page 18)

Cleaning and care

18

Housing

General information

The surfaces and controls are

susceptible to scratches and

abrasion.

Please observe the following

cleaning instructions.

 All external surfaces and controls can

be cleaned using warm water with a

small amount of washing-up liquid

applied with a well wrung-out soft

sponge or cloth.

Do not use too much water when

cleaning the controls.

Water could penetrate into the

electronics and cause damage.

 After cleaning, wipe the surfaces dry

using a soft cloth.

Do not use:

– cleaning agents containing soda,

acids, chlorides or solvents,

– abrasive cleaning agents, e.g.

powder cleaners or cream cleaners

and abrasive sponges, as well as pot

scourers or sponges which have

been used previously with abrasive

cleaning agents. These will damage

the surface material.

Important for appliances with

stainless steel surfaces

(This information does not apply to the

controls).

 Stainless steel surfaces can be

cleaned with a proprietary non-

abrasive cleaning agent designed

specifically for use on stainless steel.

 To help prevent re-soiling, a

proprietary conditioning agent for

stainless steel (available from Miele)

can also be used. Follow the

manufacturer’s instructions on the

packaging.

Special instructions for appliances

with lacquered housing

(Special order finish)

 Please observe the general notes on

cleaning earlier in this section.

It is very difficult to clean this type of

surface without causing minor marks

to the surface material. This can

become particularly noticeable if there

is halogen lighting in the kitchen.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments