Miele DA 6590 W Service Manual download pdf (Page 14)

,WARNING

TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

Before cleaning or servicing the

hood, disconnect it from the power

supply, see "Important Safety

Instructions".

,

The halogen bulbs are very hot

when in use. They stay hot for some

time after turned off. Use caution,

danger of burns.

Wet cleaning the hot bulbs will

cause damage.

Wait a few minutes after turning

them off before cleaning.

Cleaning the casing

Never use abrasive cleaners,

scouring pads, steel wool or caustic

(oven) cleaners on the hood. They

will damage the surface.

^

All external surfaces and controls can

be cleaned with a mild solution of

warm water and liquid dish soap

applied with a soft sponge.

Do not use too much water when

cleaning the controls. Water could

penetrate the electronics and cause

damage.

^

Wipe dry using a soft cloth.

Avoid:

–

cleaning agents containing soda,

acids or chlorides,

–

abrasive cleaning agents

e.g. powder or cream cleansers,

–

abrasive sponges, e.g. pot scourers

or sponges which have been

previously used with abrasive

cleaning agents.

–

sharp metal scrapers,

–

oven spray.

Special instructions for stainless

steel surfaces

(not applicable to the controls)

Stainless steel surfaces can be cleaned

using a non-abrasive stainless steel

cleaner.

To help prevent resoiling, a conditioner

for stainless steel can be applied.

Special instructions for colored

casings (RAL)

(Special order)

It is very difficult to clean this type of

surface without causing minor marks to

the surface material. This can become

particularly noticeable with darker

colors and if there is halogen lighting in

the kitchen.

Cleaning and care

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments