Miele CS 1411 User Manual download pdf (Page 8)

Technical safety

~

Installation, maintenance and

repairs may only be carried out by a

suitably qualified and competent

person in strict accordance with current

national and local safety regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

~

Before installation, check the

appliance for visible signs of damage.

Under no circumstances should you

use it if it has been damaged. A

damaged appliance is dangerous.

~

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between

the appliance and an effective earthing

system which complies with current

local and national safety regulations. It

is most important that this basic safety

requirement is present and tested

regularly, and where there is any doubt,

the household wiring system should be

inspected by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

~

Before connecting the appliance to

the mains supply make sure that the

voltage and frequency details given on

the data plate correspond with the

on-site electricity supply.

This data must correspond in order to

avoid the risk of damage to the

appliance. Consult a qualified

electrician if in any doubt.

~

Do not connect the appliance to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).

~

For safety reasons, this appliance

may only be used when it has been

built in.

~

This appliance is supplied with a

moulded plug ready for connection to a

switched socket. If you wish to connect

it to a double-pole fused spur

connection unit, or to an isolator switch,

or if the appliance is supplied without a

plug, it must be installed and

connected by a suitably qualified and

competent person in strict accordance

with current local and national safety

regulations. The manufacturer cannot

be held liable for damage caused by

incorrect installation or connection.

~

If the connection cable is damaged,

it must be replaced by a suitably

qualified electrician with a specialist

connection cable of type H 05 VV-F

(pvc insulated), available from the Miele

Spare Parts Department.

~

Never open the housing of the

appliance.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user and can

cause operational faults.

Warning and Safety instructions

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comments to this Manuals

No comments