Miele 09 276 830 Operations Instructions download pdf (Page 10)

Installation

~

The dishwasher must be installed

and connected in compliance with the

diagram supplied.

~

The dishwasher must be correctly

aligned to ensure problem-free

operation.

~

In order to ensure stability,

built-under and integrated dishwashers

must only be installed under a

continuous worktop which is secured to

adjacent cabinetry.

~

If you want to convert your

freestanding dishwasher to a

built-under ("U") model, you will need to

order the appropriate conversion kit. If

you remove the existing plinth, you

must replace it with a U-model plinth.

This is necessary to avoid the risk of

injury caused by protruding metal

parts.

~

The door springs must be adjusted

equally on both sides. They are

correctly adjusted when the door

remains stationary when left open at

45°. It is important that the door is held

in place by the springs and cannot fall

open.

Correct use

~

Do not use solvents in the

dishwasher. Danger of explosion.

~

Do not inhale or ingest dishwasher

detergent.Dishwasher detergents

contain irritant or corrosive ingredients

which can cause burning in the nose,

mouth and throat if swallowed, or inhibit

breathing. Consult a doctor immediate

-

ly if detergent has been swallowed or

inhaled.

~

Avoid leaving the door open

unnecessarily, as you could trip over it.

~

Dishes can be very hot at the end of

the programme.

Allow them to cool until they are

comfortable enough to handle before

unloading.

~

Do not sit or lean on the opened

door. This could cause the dishwasher

to tip and be damaged, and you could

get injured.

~

Only use detergent and rinse aid

formulated for domestic dishwashers.

Do not use washing-up liquid.

~

Do not use commercial or industrial

detergents as these may cause

damage, and there is a risk of severe

chemical reaction.

~

Do not fill the rinse aid reservoir with

powder or liquid detergent. This will

cause serious damage to the reservoir.

Warning and Safety instructions

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Comments to this Manuals

No comments