Miele G 5100 Operations Instructions download pdf (Page 19)

Adjusting the dosage

In order to obtain an optimal cleaning

result you can adjust the dosing

quantity of the rinse aid.

The dosage selector is preset to 3. This

dispenses approximately 3 ml of rinse

aid per program. It can be adjusted

from0to6.

The amount of rinse aid dispensed can

be more than the value set due to the

automatic adjustment of the "Sensor

Wash" program.

–

Use a higher setting if spots appear

on dry glassware.

^ Use a lower setting if streaking

appears on dishes or glasses.

^ Turn the dishwasher off "s".

^ Press the "Start / Stop" button and at

the same time turn the dishwasher on

s. Hold the "Start / Stop" button until

the "Start / Stop" indicator comes on.

If it does not come on, start over.

Press the "Delay Start" button three

times.

The "Delay Start" indicator will flash

briefly three times in intervals.

P3will flash in the display. This means

that the rinse aid dosage has been set

to 3 ml at the factory.

The dosage set will show in the display

after the P.

Select the desired setting with the

"Start / Stop" button. Every touch of

the button increases the level.

The programmed dosage is saved.

Turn the dishwasher off "s".

Before using for the first time

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

No comments

Miele G 5100 Operations Instructions Page 19