Miele KM 411 User Manual download pdf (Page 8)

Appliance faults

In the event of damage or a defect,

switch off the appliance immedi

-

ately. Disconnect completely from the

electricity supply. If the appliance has

not yet been fully installed, the

electricity cable must be disconnected

from the supply point. If connected via

a plug and socket, switch off at the

socket and withdraw the plug. Contact

the Service Department.

Do not reconnect the appliance to the

mains electricity supply until after it has

been repaired.

If there is any damage to the glass

surface the appliance must be

disconnected from the mains electricity

supply immediately and not used until it

has been repaired. Danger of electric

shock.

Repairs must only be carried out

by a suitably qualified and

competent person. Repairs and other

work by unqualified persons could be

very dangerous and could damage the

appliance. The manufacturer cannot be

held liable for unauthorised work. Never

open the housing of the appliance.

While the appliance is under

guarantee, repairs should only be

undertaken by a service technician

authorised by the manufacturer.

Otherwise the guarantee is invalidated.

Further safety notes

When using an electric socket near

the appliance, care should be

taken that the cable of the electrical

appliance does not come into contact

with the hot appliance. The insulation

on the cable could become damaged,

giving rise to an electric shock hazard.

Always ensure that food is

sufficiently cooked or reheated.

Many factors will affect the overall

cooking time, including the size and

amount of food and its temperature.

Some foods may contain

micro-organisms which are only

destroyed by thorough cooking;

therefore when cooking or reheating

foods such as poultry, it is particularly

important that the food is completely

cooked through. If in doubt, select a

longer cooking or reheating time.

The manufacturer cannot be held

liable for damage caused by

non-compliance with these Warning

and Safety instructions.

Warning and Safety instructions

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments