Miele KM 344 User Manual download pdf (Page 14)

Gas pressure regulator

A pressure regulator that is convertible

from natural to LP gas (Propane) is in

-

cluded with the appliance. The ad

-

justed pressure is for:

natural gas - 4" w.c.

LP gas - 10" w.c.

As shown in the above diagram, the in-

cluded regulator must be used when

connecting the Miele cooktop to your

gas supply. This item has been custom

-

ized by Miele to meet all applicable

safety requirements. Make sure the reg

-

ulator is easily accessible for adjust

-

ment after the appliance has been in

-

stalled.

For convenience, an AGA or CGA ap

-

proved flexible stainless steel gas hose

(accordion type) may be used between

the gas connection and the regulator.

This will allow the appliance to be lifted

out of the countertop for cleaning or

servicing. Make sure that any drawers,

cabinet doors, etc., do not rub on this

gas hose.

Do not use any regulator unless it

has been supplied by Miele. Doing

so may cause a gas leak.

If there is any doubt concerning instal

-

lation contact the Miele Technical Ser

-

vice Department at:

USA 1-800-999-1360

[email protected]

CDN 1-800-565-6435

[email protected]

After connecting the appliance check

all fittings for gas leaks e.g. with

soapy water.

When installed properly, the flame will

be steady and quiet. It will also have a

sharp, blue inner core that will vary in

length proportional to the burner size.

Flame adjustment will not be necessary.

Gas connection

14

gas cooktop

use pipe

dope

regulator (included)

½ " NPT

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments