Miele KM6322 Manual download pdf (Page 73)

Solid wood, tiled and glass

worktops

Preparing the worktop

a Worktop

b Hob

c Gap

d Wooden frame 13 mm

(to be provided on site)

As the ceramic glass and the

worktop cut-out have a certain

dimensional tolerance, the size of

gap c can vary (min. 1 mm).

^

Make the worktop cut-out as shown

in "Building-in dimensions".

Observe the safety distances (see

"Safety instructions for installation").

^

Fix the wooden frame d 7mm

below the top edge of the worktop

(see diagram).

Connecting the mains cable to the

appliance

The mains cable must only be

connected to the appliance by a

qualified and competent electrician

in strict accordance with current

local and national safety regulations

(BS 7671 in the UK).

^

Follow the instructions in the wiring

diagram (see "Electrical connection -

Wiring diagram").

Installing the hob

^ Feed the mains connection cable

down through the cut-out.

^ Centre the hob b in the cut-out.

^ Connect the hob to the mains.

^ Check that the hob works.

^ Seal the remaining gap c with a

silicone sealant that is heat-resistant

to at least 160 °C.

Observe the silicone sealant

manufacturer's instructions.

For granite and marble tiles, only

use silicone sealant that has been

especially formulated for granite and

marble.

Flush-fitted hobs

73

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments