Miele B 995 D Operations Instructions download pdf (Page 17)

One reservoir is sufficient for approx.

40 minutes of ironing with steam. It

takes approx. 4 minutes for the water to

heat up to the correct temperature for

steam ironing. The heating-up time may

change as a result of limescale building

up in the reservoir.

It is advisable to switch off the steam

function during an interruption to

ironing and at the end of ironing.

Emptying the water reservoir

Before emptying the reservoir

make sure that the water in it has

cooled down and that the roller has

cooled down.

The reservoir should be emptied after

each use to avoid damage from

deposits present in the water (e.g.

chlorine, calcium or copper).

^ Unscrew the water reservoir cap.

To make it easier, use the screw-on

funnel.

Slowly fold the ironer up and at the

same time hold a suitable container

(e.g. a measuring jug) underneath

the reservoir to catch the water.

^ When all the water has run out,

replace the cap.

The screw-on funnel can be stored

on the cable holder when not in use.

Steam

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

No comments

Miele B 995 D Operations Instructions Page 17