Miele 13384721USA Operations Instructions download pdf (Page 76)

Electrical connection

76

Verify that the voltage, load and cir-

cuit rating information found on the

data plate match the household elec-

trical supply. This data must match

to prevent damage to the steam iron-

ing system. If in doubt, consult a li-

censed electrician.

All electrical work should be per-

formed by a qualified electrician in

strict accordance with national and

local safety regulations. Installation,

repairs and other work by unqualified

persons could be dangerous.

You will find the necessary connection

data on the data plate, which is located

in the tower behind the water container.

The socket should be next to the appli-

ance and easily accessible.

The plug must be plugged into an outlet

that is properly installed and grounded.

If the power cord is defective, it must

only be replaced by a qualified electri-

cian.

Do not use a power bar or an exten-

sion cord to connect the steam iron-

ing system to the power supply.

Extension cords or power bars do

not guarantee the required safety of

the appliance (e.g. danger of over-

heating).

Do not connect the steam ironing

system to an off-grid inverter. These

devices are used for autonomous

power supply, e.g. a solar power

system.

Power surges could trigger a safety

shutdown. This could damage the

electronic system.

Do not use the appliance with what

is referred to as energy saving de-

vices.

These reduce the energy supply to

the appliance, which could generate

excessive heat.

 WARNING: THIS APPLIANCE

MUST BE GROUNDED!

If there is any question concerning

the electrical connection of this ap-

pliance to your power supply, please

consult a licensed electrician or con-

tact Miele’s Technical Service De-

partment.

1 2 ... 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments