Miele HM 21-140 Operations Instructions download pdf (Page 4)

To avoid the risk of accidents and

damage to the ironer please read these

instructions carefully before using it for the

first time. They contain important

information on its safety, use and

maintenance.

Keep these instructions in a safe place

and ensure that new users are familiar

with the content. Pass them on to any

future owner.

Correct application

This ironer must only be used for ironing

articles which were washed in water and

which have a care label stating that the

article is suitable for machine ironing.

This ironer is not intended for use by

persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience or

knowledge, unless they are supervised

whilst using it or have been shown how to

use it correctly by a person responsible for

their safety.

If the ironer is used in a publically

accessible room, it is the supervisor's

responsibility to ensure that operators are

able to use it safely.

Technical and electrical safety

Before setting up the ironer, check it for

any externally visible damage. Under no

circumstances should you use it if it has

been damaged. A damaged ironer could be

dangerous.

If the connection cable is damaged, it

must be replaced by a Miele approved

service technician.

Before connecting the ironer, ensure that

the connection data on the data plate

(fuse rating, voltage and frequency) match

the mains electricity supply.

If in any doubt, consult a qualified

electrician.

The electrical safety of this ironer can

only be guaranteed when continuity is

complete between it and an effective

earthing system which complies with current

local and national safety regulations. It is

most important that this basic safety

requirement is present and regularly tested,

and where there is any doubt the on-site

wiring system should be inspected by a

qualified electrician. The manufacturer

cannot be held liable for damage or injury

caused by an inadequate earthing system

(e.g. electric shock).

This ironer complies with all relevant

local and national safety requirements.

Unauthorised repairs could result in

unforeseen dangers for the user, for which

Miele cannot accept liability. Repairs should

only be undertaken by a Miele approved

service technician. Ensure current is not

supplied to the ironer until after maintenance

or repair work has been carried out.

Faulty components must only be

replaced by genuine Miele original parts.

The manufacturer can only guarantee the

safety of the appliance when Miele

replacement parts are used.

Warning and Safety instructions

4 M.-Nr. 07 799 690

1 2 3 4 5 6 7 8 9 ... 21 22

Comments to this Manuals

No comments