Miele KFNS 3929 SE ed Operations Instructions download pdf (Page 14)

Before using for the first time

The stainless steel surface has a layer

of protective foil to prevent scratching

during transportation.

^

Do not remove this foil until the

appliance has been installed or built

in. Start at one of the upper corners.

^

Clean stainless steel surfaces with a

suitable conditioning agent for

stainless steel.

^

Clean the inside of the appliance and

the accessories with warm water and

a little washing up liquid, and then

dry with a soft cloth.

Important:

To ensure the correct functioning of

the appliance, let it stand for

between 1½ and 2 hour after

transporting it to its final location

before connecting it to the mains.

Switching on

The wine cooler and freezer section are

switched on independently of one

another so that, if required, you can

switch on only one.

Wine cooler

^

Press the wine cooler On/Off button

on the left hand side of the control

panel.

The wine cooler temperature display

will light up and the wine cooler starts

cooling.

Freezer section

^

Press the freezer section On/Off

button on the right hand side of the

control panel.

Bars light up in the freezer section

temperature display and the freezer

section starts cooling.

Allow the appliance to run for a few

hours before placing food in it. This will

ensure that the temperature is

sufficiently low.

Cool pack

Place the cool pack in the top freezer

drawer or to save space on the freezer

tray. The cool pack will be at its most

effective after it has been in the freezer

for approx. 24 hours.

Switching off

^

Press the appropriate On/Off button

until the temperature display goes

out.

The cooling system is switched off. If

this does not happen, then the safety

lock has been activated.

Switching on and off

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 95 96

Comments to this Manuals

No comments