Miele S 247i User Manual download pdf (Page 21)

Technical Information

2xx, S 3xx & S 4xx Canister Vacuums

Figure 1-31: 20cm Swivel Adapter Sleeve to Connect Lockable Accessories

1.5 Electrobrush Plug System (S 3xx and S 4xx Only)

Due to a change in the EN 60320 component legislation, the built-in socket

and connection cable for the SEB 215 electrobrush have been modified with

effect from March 1, 1998.

Vacuum cleaner built-in socket

All vacuum cleaners manufactured since March 1, 1998, are fitted with the

new built-in socket.

Designation on the vacuum cleaner data plate:

Old version S 324i or S 424i

New version S 324i-2 or S 424i-2

Electrobrush connection cable

Designation on the electrobrush data plate:

Old version SEB 215

New version SEB 216

Different versions

If the built-in socket and the electrobrush connection cable plug do not match,

the connection cable must be changed as appropriate.

4.0 Description of Function

4.1 Air Clean Plus Filter System

The dustbag is made of two-ply filter paper and acts to filter out up to 99.6% of

the dust in the ambient air taken into the cleaner.

Depending on model, either an Active Air Clean filter or an S-class filter is also

supplied. It is fitted in a cassette at the exhaust opening. Models with this type

of filter are supplied with a blower plate. To use the unit as a blower, the filter

cassette must be removed and this blower plate inserted.

4.1.1 Super Air Clean Filter

After air has passed through the motor protection web filter, it flows along the

exhaust path in the rear casing to the Super Air Clean filter where remaining

dust is removed. The electrostatically pre-charged Air Clean filter can remove

almost 100% of any remaining fine dust particles.

The dust quantity remaining in the air is only approx. 0.05 mg/m

The dust quantity in normal room air is approx. 0.10 mg/m

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

No comments

Miele S 247i User Manual Page 21