Miele 30611468USA Installation Manual download pdf (Page 29)

Frequently Asked Questions

With the help of the following guide minor faults in the performance of the ma-

chine, some of which may result from incorrect operation, can be remedied with-

out contacting the Service Department. Time and money will be saved because a

service call will not be needed.

This guide may help you to find the reason for the fault, and how to correct it.

Problem Possible cause and solution

The drawer will not

open.

The safety screws on the back of the drawer have not

been removed.

 Contact Miele Technical Service.

The drawer cannot be

switched on.

The appliance is not correctly plugged in and

switched on at the line power socket.

 Insert the plug and switch on at the socket.

The fuse is defective or has tripped.

 Reset the trip switch in the line power fuse box

(minimum fuse rating – see data plate). If, after re-

setting the trip switch or replacing the fuse in the

line power fuse box and switching the drawer back

on, the drawer will still not operate, contact a qual-

ified electrician or Miele Technical Service.

There was a loud bang

during operation.

The transit device has not been not removed and the

air filter has not been fitted.

 Contact Miele Technical Service.

The drawer has

switched itself off.

The drawer will switch itself off automatically to save

energy if no other action is taken within a certain time

frame after switching it on or after the end of a vacu-

uming process.

 Switch the drawer back on.

The sensors are not re-

acting to touch.

Foreign objects, soiling, or liquid residues have got

onto the control panel.

 Remove the objects and/or clean the control

panel.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

No comments

Miele 30611468USA Installation Manual Page 29