Miele PW 6101 Operations Instructions download pdf (Page 26)

Peak load cut off

When activating the peak load cut off the

heat is turned off and the program is

stopped. The display shows:

1 Hot Wash

Program stop by peak load function

The program continues.

i ü f

When the peak load function ends the

program will continue automatically.

PC Connection

A serial interface is located at the rear of the

washer to connect the machine to a PC

(Personal Computer).

PC-Operation: Program changes can be

made via a PC, or a new program can be

downloaded.

Printer-Operation:

It is possible to print out whole programs or

parts of programs.

This requires a special Editor Program which

is available from the Miele Professional

Department.

Load size

If the machine is equipped with a load

module, the load weight will be displayed, in

0.5 lb increments, while loading the laundry.

The maximum laundry weight is displayed

next to the selected program.

^

Reset with the -> I <- "zero setting" if the

weight display does not show "00.0" when

the drum is empty.

1 Hot Wash 00.0 / 16 lb

140 °F Main wash

Rinse e

+im k m -> I <- A

If there was still laundry in the drum when

the weight display was reset, the display

shows:

1 Hot Wash - - .-

/

16 lb

140 °F Main wash

Rinse e

+im k m -> I <- A

^ Reset again with the -> I <- button.

If the machine is overloaded (wet laundry)

the machine calculates after the programs

start with the nominal value. This value is

saved in the operating data module.

At the end of a program, with the drum

stationary, the residual moisture of the

laundry is displayed.

1 Hot Wash

Program end Residual moisture 60 %

Door can be opened..

m FC A

See "Use - Adjust the program" for more

information.

Optional modules

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Comments to this Manuals

No comments