Miele W3033 Operations Instructions download pdf (Page 46)

Installation site

A concrete or reinforced floor is the

most suitable surface for the washer.

These types of floors are less prone to

vibration during the spin cycle.

Note:

–

The machine must be leveled and

securely positioned.

–

To avoid vibration while spinning, the

machine should not be installed on

soft floor coverings.

If the installation must be performed on

a wooden floor:

^ Install the unit on a

2 ft. x 2 ft. x 1

(61 x 61 x 3 cm) plywood base.

Ideally, the base should be large

enough to span several joists, and

should be anchored to the joists, not

just the floor boards.

It is best to install the washer in the

corner of a room, where the stability of

the floor is at its greatest.

If the machine is installed on a

raised platform, it should be secured

with retaining clips. These clips are

available from your dealer or Miele.

If installed on a masonry or concrete

base, the base should have a

" to

" (12 - 20 mm) high rim. This is

required to prevent the washer from

vibrating off the stand during the

spin cycle.

Installation

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

No comments

Miele W3033 Operations Instructions Page 46