Miele 29640550USA Manual download pdf (Page 75)

The machine must be connected to

the water supply in accordance with

local and national regulations.

Disconnect the machine from the

electrical supply before connecting

it to the water supply.

Turn off the water supply before

connecting the coffee machine to

the plumbing.

–

All units and systems used to deliver

the water to the coffee system must

conform with the requirements of the

respective country.

– Only connect the machine to the

cold water supply.

– The machine can be connected

without a non-return valve.

– The on-site water line must have a

water shut-off valve to turn the water

off if needed. If not present, have a

water valve installed by a licensed

plumber.

–

The water faucet must be accessible

after installation.

–

Water pressure on-site:

Minimum: 14.5 psi

Maximum: 145 psi, if higher, install a

pressure reduction valve.

–

Suitable 1/4" tubing or copper piping

must be supplied for plumbing.

–

To ensure the best coffee quality, the

maximum length of the tubing or

copper pipe should not exceed 4 ft.

11" (1.5 m). If too much water

remains in the tubing the coffee

quality could be affected.

Make sure that the shut-off valve is

accessible after the unit has been

installed.

Parts must only be replaced with

original Miele spare parts, available

from Miele.

Plumbing

75

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 87 88

Comments to this Manuals

No comments