Miele Built-in coffee machine Operations Instructions download pdf (Page 85)

A faulty stainless steel hose must

only be replaced by a genuine Miele

replacement hose (available from

Miele). Make sure that the water

hose is suitable for food use.

Fitting the stainless steel hose

to the coffee machine

Make sure that the stainless steel

hose is not kinked or damaged. The

stainless steel hose must not be

shortened.

^ Remove the cover from the mains

water connection at the back of the

coffee machine.

^ Take the angled end of the stainless

steel hose and check whether there

is a washer. Fit one, if not.

^ Screw the coupling nut on the

stainless steel hose onto the

stopcock.

^

Ensure that all connections are

watertight.

Connection to the water inlet

Before making plumbing

connections, ensure that the

machine is disconnected from the

mains electrical supply.

Connection to the water supply should

be carried out by a qualified plumber

and should incorporate a stopcock with

a 3/4" thread.

^

Check whether there is a washer. Fit

one, if not.

^ Connect the stainless steel hose to

the stopcock.

Use the hose supplied with the

machine. Old or used hoses must

not be connected to the coffee

machine.

^

Ensure that it is screwed into position

correctly.

^

Turn on the stopcock slowly and

check for leaks. Correct the position

of the seal and union, if necessary.

Proceed with building in the coffee

machine (see "Installation").

Plumbed in water connection

85

1 ... 84 85 86 87 88 89 90 91 92

Comments to this Manuals

No comments