Miele 28228055USA Installation Manual download pdf (Page 30)

Recirculation mode

If site conditions are not suitable for the

hood to be used for air extraction, the

appliance must be converted for

recirculation using the following

installation kit. It can be ordered from

your Miele dealer or the Technical

Service Dept.

It contains a 6" (150 mm) diameter

hose, a grille and a hose clamp to

secure the hose at the exhaust

connection of the hood.

DA 2280 installation needs

one installation kit and two active

charcoal filters

DA 2210 installation needs

two installation kits and four active

charcoal filters

A non-return flap is not needed in

recirculation mode.

Install the installation kit according to

the installation situation.

When installing the recirculation

vents make sure that the slats point

towards the center of the room and

not to a wall or the ceiling.

^ Install the active charcoal filters (see

"Cleaning and Care") and reprogram

the charcoal filter timer.

Installation

110

240

223

160

dai2453

319

143

150

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Miele 28228055USA Installation Manual Page 30