Miele 28390655USA Manual download pdf (Page 18)

Cleaning and care

18

WARNING: TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

 Before cleaning or servicing the

hood, disconnect it from the power

supply, see "IMPORTANT SAFETY

INSTRUCTIONS".

Stainless steel housing

General

The surfaces and control buttons are

susceptible to scratching and

chipping.

Observe the following cleaning

instructions.

 Clean all surfaces and control

buttons using warm water and liquid

dish soap only, applying the mixture

with a sponge cloth.

Make sure that no water gets into

the interior of the hood.

Only use a damp cloth to clean the

hood, especially in the control panel

area.

 After cleaning, dry the surfaces with a

soft cloth.

Avoid the following:

– Cleaners containing soda, acid or

chloride, or cleaners containing

solvents

– Abrasive cleaners such as scouring

powder, scouring liquid, abrasive

sponges such as pot scourers, or

used sponges that still contain

residues from abrasive cleaners

Special instructions for stainless

steel surfaces

(does not apply to control buttons)

 Stainless steel surfaces can also be

cleaned using a non-abrasive

stainless steel cleaner, available from

Miele.

 To prevent the surfaces from quickly

becoming dirty again, we

recommend treating them with a

stainless steel care conditioner.

Apply sparingly over the entire area

using a soft cloth.

Special instructions for RAL color

finish housing

(special order)

 Observe the general cleaning

instructions contained in this chapter.

Minor scratches on the surface are

inevitable when cleaning the housing.

Depending on the lighting in the

kitchen, this may negatively affect the

appliance's appearance.

1 ... 17 18 19 ... 44

Comments to this Manuals

No comments