Miele DA 229-2 Operations Instructions

Operating and installation instructionsVentilation SystemDA 229-2To prevent accidentsVand machine damage,read these instructionsbefore installation or

Turning off the fan^Press the On/Off button to turn thefan off.The indicator goes out.Automatic Safety Shut OffThe fan will be turned off automaticall

Grease filter timerA timer monitors the hours of fan opera-tion. The indicator for the grease filterwill light after 30 hours of operation. Thegrease

Reprogramming the grease filtertimerThe grease filter timer is preset to 30hours. This time can be lengthened orshortened to 20, 30, 40 or 50 hours.–A

Before cleaning or servicing thehood, disconnect it from the powersupply by either removing the fuse,unplugging it from the outlet or man-ually "

Grease filtersThe reusable metal grease filters re-move solid particles from the ventedkitchen air (grease, dust, etc).The grease filters should be cl

When putting the grease filters backmake sure that the locking clips are vis-ible facing down towards the cookingsurface.If a filter is incorrectly in

Changing the light bulbBefore changing the light bulbs, dis-connect the hood from the powersupply by either removing the fuse,unplugging it, or manual

In the event of a fault which you cannotcorrect yourself please contact:–Your Miele Dealeror–The Miele Technical ServiceDepartmentUSA 1-800-999-1360te

18

Installation instructions

Warning and Safety instructionsGuide to the applianceFunctional descriptionOperationMain power switch . . . . . . . . . . . . . . . . . . . . . . . .

Caring for the environmentInstallation accessoriesPlywood backingElectrical dataAppliance dimensionsInstallationRetaining plates . . . . . . . . . . .

Disposal of packing materialThe cardboard box and packing materi-als protect the appliance during ship-ping. They have been designed to bebiodegradab

Installation accessories22

a 2 protective shieldsprevent scratches to the chimney dur-ing installation.b 2 hose clips for securing theducting.c 1 reducing collarfor use with 5&q

The majority of the weight of the in-stalled ventilation system will besupported by retaining plate A. Itmust be firmly attached to the studframing be

All electrical work should be per-formed by a qualified electrician instrict accordance with national andlocal safety regulations.Installation, repair

Appliance dimensions26

Do not install this exhaust hood overcooktops burning solid fuel.When installing the hood, make surethat the following minimum dis-tance (S) between t

Retaining platesThe ventilation system will be mounted tothe wall through the use of retainingplates. Plate A is installed first, followedby plate B.

Retaining plate A^Drill two1/8" (3 mm) holes, one at S +3" (75 mm) and one at S + 153/4"(400 mm) on the center line (see "Ap-plian

Read these Operating Instructions carefully before installing orusing the Ventilation System.This appliance is intended for resi-dential use only. Use

Retaining plate B^Hold retaining plate B to the wall andpush up until it is directly below theceiling. Use the notches and the cen-ter line to align i

Attaching the canopy^ Hang the canopy on the angledbrackets on retaining plate A.^ Secure the canopy with two screws5 x 60 mm.Adjusting the canopyIf t

Inserting the non-return flap^If a non-return flap is not present inthe venting system, the non-returnflap supplied must be fitted into theexhaust con

Electrical connectionBefore connecting the applianceread the "Warning and Safety In-structions" and the "Electrical data"sections.

Attaching the chimneyextensionThe use of a chimney extension, allowsthe hood to be installed at various dis-tances from the ceiling.^Remove the protec

Attaching the chimney^ Remove the protective foil from thechimney.^ Pull the chimney apart slightlyandslide it over the chimney extension.Do this care

Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can be harm-ful or fatal if inhaled. The exhaustgases extracted by the hoodsh

Never connect an exhaust hood toan active chimney, dryer vent, ventflue, or room venting ductwork. Seekprofessional advice before connect-ing an exhau

38

39

This equipment is not designed formaritime use or for use in mobileinstallations such as caravans or air-craft. However, under certain conditionsit ma

Alteration rights reserved / 000 CDN - 1801This paper consists of cellulose which has been bleached without the use of chlorine.

Do not use an extension cord toconnect the appliance to electricity.Extension cords do not guarantee therequired safety of the appliance, (e.g.danger

Guide to the appliance6

Chimney extensionChimneyCanopyOverhead lightingMain power switchGrease filterGrease filter buttonThe indicator below the grease filterbutton lights wh

The ventilation hood works by air ex-traction. The air is drawn in andcleaned by the grease filters and di-rected outside.The hood comes equipped with

Main power switchPress the main power switch to "I". Thefan and the lighting can now be oper-ated.If the appliance is not going to be usedfo