Miele DA 6296 W Operations Instructions

Installation InstructionsDA6296 D en - CA Installation, repair and maintenance work should be performed by a Miele au

Installation39 Holding the installation framesecurely, remove the two fixingscrews and extend the installationframe to its maximum length. Replace t

Installation40 Secure the exhaust socket to thehose using a hose clip. Secure the hose to the directionalunit socket using a hose clip. Check that

Installation41 Fit the four telescopic chimneyclamps. When the screws aretightened, the clamps spread out andpush the telescopic expansion pieceupwar

Installation42A non-return flap is supplied with thehood or is already fitted in the exhaustsocket of the motor unit (depending onmodel). With vented

Installation43 Connect the power cord. See"Electrical connection." Place the exhaust ducting onto theexhaust socket. Unscrew both screws

Installation44 Raise the canopy to the desiredheight and secure it with the screws. Hold the chimney securely, bendback the retaining tabs and caref

Installation45 Remove the grease filters from thehood. Insert the safety screw on the inside. With recirculation mode (RM)ventilation hoods, insert

Exhaust duct46WARNING: Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled.To reduce the risk o

Exhaust duct47Condensate trap In addition to insulating the exhaustduct, we recommend installing acondensate trap to collect andevaporate any con

Electrical connection48WARNING: TO REDUCE THE RISKOF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS, OBSERVETHE FOLLOWING:All electrical work should beperf

Installation31Before installation Before installing the appliance,read all of the information containedin this chapter and also in the"IMPORTANT

Activating Con@ctivity 2.049Installation of the [email protected] stickIn order for you to be able to use theCon@ctivity 2.0 function, the cooktopmust be

Activating Con@ctivity 2.050Activating the cooktop While the ventilation hood issearching for a wireless connection,start activation on the cooktop.M

Service and warranty51For faults that you cannot resolve onyour own, please contact your Mieledealer or Miele Technical Service.The telephone number f

Technical data 52Fan motor 350 WCooktop lighting 4 x 3 WGlass edge lighting 2 x 10 WTotal connected load 382 WVoltage, Frequency 120 V AC, 60 HzFuse r

9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.comU.S.A.Miele, Inc.National HeadquartersPlease have the model and serial numberof your a

M.-Nr. 09 968 600 / 00en-USDA 6296 D

Installation32Appliance dimensionsaMounting area for the exhaust ducting and power cable. In recirculation mode,only the power cord is required. bPoss

Installation33fA power cord is required to connect the hood to the socket in the ceiling. Withextraction mode flexible ducting is also required. Exhau

Installation34Installation recommendations– We also recommend a distance of atleast 25 1/2" (650 mm) above electriccooktops to provide more works

Installation358 5/8"220 mm 8 5/8"220 mmdai3435aus Draw two intersecting lines on theceiling. For vented mode:– Place a section of the ex

Installation36 Use a knife to release the fourspacers and the two covers from thespacer frame supplied. Use the spacer frame as a drillingtemplate.

Installation37The spacer frame can be installedbetween the chimney and the ceiling.This creates a shadow which gives theillusion of a gap between the

Installation38 Hang the installation frame on thefour screws. The front of the frame ismarked with a "V." If using the spacer frame, place