Miele S 2001 Service Manual download pdf (Page 34)

– If the exhaust is ducted into an

inactive flue, the air must be expelled

parallel to the flow direction of the

flue.

Never connect an exhaust hood to

an active chimney, dryer vent, flue,

or room venting ductwork. Seek

professional advice before

connecting an exhaust hood vent to

an existing, inactive chimney or vent

flue.

Important

If the ductwork runs through rooms,

ceilings, garages, etc. where

temperature variations exist, it may

need to be insulated to reduce

condensation.

Condensate trap

optional accessory

In some cases, a condensate trap may

also be required to collect and

evaporate any condensate which may

occur. This optional accessory is

available for ducts 5" (125 mm) and 6"

(150 mm) in diameter.

^ When installing a condensate trap,

ensure that it is positioned vertically

and if possible directly above the

exhaust outlet.

Air extraction

34

1 ... 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments