Miele G 5100 SCI Operations Instructions download pdf (Page 35)

Standby

To save energy, the dishwasher will

switch to Standby mode a few minutes

after the last time a button has been

pressed or a few minutes after the end

of the programme. The indicator lights

and the time display, if applicable, will

go out and only the Start/Stop indicator

will flash slowly.

^

Press the On/Off button K to switch

the indicators and display back on

again.

If the dishwasher is not switched off at

the end of the programme, it will switch

off completely after a few minutes in

Standby mode (see "Additional

functions, Optimise standby").

The dishwasher will not switch into

Standby mode whilst a programme

is running, if salt or rinse aid needs

to be replenished or there is a fault.

If you only use combination

products containing salt and rinse

aid in your dishwasher, you can

switch the refill indicators off so that

the dishwasher will go into Standby

despite a lack of salt or rinse aid

(see "Before using for the first time").

You cannot switch off fault

indicators.

At the end of the programme

The "End" indicator light will come on at

the end of the programme.

The drying fan will continue to run

for a few minutes at the end of the

Quick wash programme.

The dishwasher can now be opened

and unloaded (see "Unloading the

dishwasher").

,

To prevent the risk of steam

damage to the worktop edging

above the dishwasher, it is

advisable to leave the door closed

until you are ready to unload the

crockery. Alternatively you can open

the door fully until the crockery is

cool enough to unload. Do not leave

the door only partially open.

Switching off

At the end of a programme:

^

Switch the dishwasher off using the

On/Off button K.

The dishwasher will continue to use

electricity until it is switched off with

the On/Off button K.

If the dishwasher is not going to be

used for a longer period of time, e. g.

whilst on holiday, the stopcock should

be closed.

Operation

35

1 ... 34 35 36 ... 72

Comments to this Manuals

No comments