Miele G 5575 User Manual download pdf (Page 68)

Hardwired electrical connection

It is possible to hardwire this appliance

to an existing power cable.

,

CAUTION: Before servicing,

disconnect the power supply by

either removing the fuse, shutting off

the power main or manually

"tripping" the circuit breaker.

Installation work and repairs should

only be performed by a qualified

technician in accordance with all

applicable codes and standards.

Repairs and service by unqualified

persons could be dangerous and

the manufacturer cannot be held

responsible.

Before connecting the appliance to

the power supply, make sure that

the voltage and frequency listed on

the data plate correspond with the

household electrical supply. This

data must correspond to prevent

machine damage. Consult an

electrician if in doubt.

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE

GROUNDED.

This appliance must be connected to a

grounded metal, permanent wiring

system, or an equipment-grounding

conductor must be run with the circuit

conductors and connected to the

equipment-grounding terminal or lead

on the appliance.

,

Prior to making a hardwire

connection to the terminal, remove

the power cord. Otherwise there will

be a risk of electric shock from the

attached plug.

An existing flexible supply cord or

cable shall have a minimum thickness

of AWG 14.

120 V, 60 Hz, 15 A fuse rating

Black wire (live): connect to L

White wire (neutral): connect to N

Green wire (ground): connect to -

,

After attaching the permanent

power supply cord, check that all

screws on the terminal block and the

strain relief are tightened.

Electrical connection

68

1 ... 67 68 69 70 71 72

Comments to this Manuals

No comments