Miele G 693-4 Operations Instructions download pdf (Page 21)

Note

^

Remove coarse food residues from

crockery.

There is no need to rinse items under

running water.

,

Do not wash items soiled with

ash, sand, wax, lubricating grease

or paint in the dishwasher. Ash does

not dissolve and is distributed in the

wash cabinet. Wax, sand, lubricating

grease and paint cause damage to

the dishwasher.

Crockery can be loaded anywhere in

the baskets, but the following notes

should be observed:

^ Do not place crockery and cutlery

inside other pieces where they may

be concealed.

^ Load the crockery so that water can

access all surfaces. This ensures that

it is properly cleaned.

^

Make sure that all items are securely

positioned.

^

Hollow items such as cups, glasses,

pans, etc. must be inverted in the

basket.

^

Tall, narrow, hollow items, e.g.

champagne glasses, should be

placed in the centre of the basket to

ensure better water coverage.

^

Deep based items should be placed

at an angle so that water can run off

them freely.

^

The spray arms must not be blocked

by items which are too tall or hang

through the baskets.

If in doubt, test for free movement by

manually rotating the spray arms.

^

Make sure that small items do not fall

through the holders in the baskets.

Small items, e.g. lids, should

therefore be placed in the cutlery tray

or cutlery basket.

Some foodstuffs may contain natural

dyes, e.g. carrots, tomatoes or

ketchup. Plastic items in the

dishwasher may discolour if large

quantities of these foodstuffs find

their way into the appliance on the

crockery. The stability of plastic

items is not affected by this

discolouration.

When the dishwasher is being

loaded food and drink residue may

drip onto the sides of the

dishwasher door.

These surfaces are outside the wash

cabinet and are not accessed by

water from the spray arms.

Food residue should therefore be

wiped away before the dishwasher

door is closed.

Loading the dishwasher

21

1 ... 20 21 22 ... 68

Comments to this Manuals

No comments