Miele Paramount Operations Instructions download pdf (Page 53)

Cleaning the water inlet filter

A filter is incorporated in the screw

connection of the valve on the water

inlet hose. The filter must be cleaned

when dirty, otherwise insufficient water

flows into the wash cabinet.

,

The plastic housing of the water

connection contains an electrical

component. It must not be dipped in

water.

Recommendation

If the mains water contains a large

amount of insoluble substances, we

recommend fitting a large-area filter in

the connection between the stopcock

and the water inlet hose threaded

union. This filter is available from the

Miele Spares Parts dept.

Cleaning the filter:

^ Disconnect the dishwasher from the

mains supply. Switch off at the mains

socket and withdraw the plug.

^

Close the stopcock.

^

Unscrew the inlet hose.

^

Carefully remove the seal.

^ Withdraw the filter using pointed

pliers and rinse clean under running

water.

^ Replace the filter and seal, making

sure they are sitting correctly.

^ Reconnect the inlet hose to the

stopcock, making sure it goes on

correctly and is not cross-threaded.

^

Turn on the stopcock gradually to

test for leaks. If there is a leak, the

inlet hose might not be on securely,

or it may have been screwed on at an

angle. Unscrew and reconnect the

water inlet valve correctly.

Maintenance

53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Comments to this Manuals

No comments