Miele DA210-3 User Manual

Operating and installation instructionsVentilation SystemDA 210-3DA 220-3To prevent accidentsand machine damage,read these instructionsbeforeinstallat

The ventilation hood works by air ex-traction. The air is drawn in andcleaned by the grease filters and di-rected outside.The hood comes equipped with

Main power switchPress the main power switch to "I". Thefan and the lighting can now be oper-ated.If the appliance is not going to be usedfo

Turning off the fan^Press the On/Off button to turn thefan off.The indicator goes out.Automatic Safety Shut OffThe fan will turn off automatically10 h

Grease filter timerA timer monitors the hours of fan opera-tion. The indicator for the grease filterwill light after 30 hours of operation. Thegrease

Reprogramming the grease filtertimerThe grease filter timer is preset to 30hours. This time can be lengthened orshortened to 20, 30, 40 or 50 hours.–A

Before cleaning or servicing thehood, disconnect it from the powersupply by either removing the fuse,unplugging it from the outlet or man-ually "

Grease filtersThe reusable metal grease filters re-move solid particles from the ventedkitchen air (grease, dust, etc).The grease filters should be cl

Changing the light bulbBefore changing the light bulbs, dis-connect the hood from the powersupply by either removing the fuse,unplugging it, or manual

In the event of a fault which you cannotcorrect yourself please contact:–Your Miele Dealeror–The Miele Technical ServiceDepartmentUSA 1-800-999-1360te

Installation instructions

IMPORTANT SAFETY INSTRUCTIONSGuide to the applianceDA 210-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Caring for the environmentStructural supportElectrical dataAppliance dimensionsDA 210-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disposal of packing materialThe cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable an

The ceiling mounting plate will sup-port the weight of the hood. Thisceiling plate must be attached torigid structural framing that is sup-ported in i

All electrical work should be per-formed by a qualified electrician instrict accordance with national andlocal safety regulations.Installation, repair

DA 210-2a Mounting bolt holesb Alternative positions for feeding through the power cordc Exhaust connection 6" (150 mm) diameterAppliance dimensi

DA 220-2a Mounting bolt holesb Alternative positions for feeding through the power cordc Exhaust connection 6" (150 mm) diameterAppliance dimensi

Do not install this exhaust hood overcooktops burning solid fuel.When installing the hood, make surethat the following minimum dis-tance (S) between t

Mounting plate: DA 210-2Mounting plate: DA 220-2^Hold the mounting plate up to theceiling so that the orange arrow facesthe front of the hood and alig

^ Secure the ducting to the mountingplate using a hose clip.^ Insert the short edge of the twospring clips into their slots from be-low and pivot them

^Screw the mounting plate through theceiling and into the structural framingusing 8 x 60 lag bolts and washers.Once tight, make sure that themounting

Read these Operating Instructions carefully before installing orusing the Ventilation System.This appliance is intended forresidential use only. Use t

^Bolt the flange firmly to the ceiling us-ing the four M6 nuts.^Shorten the power cable as much aspossible and attach it to the terminalblock inside t

Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can be harm-ful or fatal if inhaled. The exhaustgases extracted by the hoodsh

Never connect an exhaust hood toan active chimney, dryer vent, ventflue, or room venting ductwork. Seekprofessional advice before connect-ing an exhau

33

34

35

Alteration rights reserved / 5002This paper is made from cellulose bleached without the use of chlorine.00M.-Nr. 05 853 490 / V

This equipment is not designed formaritime use or for use in mobileinstallations such as caravans or air-craft. However, under certain conditionsit ma

, WARNING - TO REDUCETHE RISK OF A RANGE TOPGREASE FIRE:Never leave surface units unat-tended at high settings. Boiloverscause smoking and greasy spil

Installation, WARNINGTo reduce the risk of fire, onlyuse metal ductwork.When installing the hood, follow therecommended minimum safety dis-tances betw

DA 210-2Guide to the appliance7

DA 220-2Guide to the appliance8

a Cover plateb Chimneyc Canopyd Grease filterse Overhead lightingf Control panelg Main power switchh Light buttonThis button turns the light on and of