Miele F1411VI User Manual

Operating and InstallationInstructionsFreezerwith Ice MakerF 1411 ViTo prevent accidentsand appliance damageread these instructionsbeforeinstallation

Before using for the first time^Clean the inside of the appliance andthe accessories with a mild solutionof warm water and liquid dish soap.Dry with a

Using the settingsThis appliance is operated with the useof touch keys activated by a finger.–An available button will appear white.–A selected button

Turning the button soundOn/OffIf you prefer the buttons to be silentwhen touched the button sound can beturned off.^Touch the access button "p&qu

Turning off for longer periodsof timeIf the appliance is not going to be usedfor an extended time (for example,during a vacation) some precautionsneed

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or an opendoor.The alarm sy

Setting the temperature^Touch the access button "p"soitturns yellow.^Use the X and Y buttons next to thetemperature display to set thetemper

Temperature unit(Fahrenheit/Celsius)The temperature can be displayed indegrees Fahrenheit (°F) or Celsius (°C).^Touch the access button "p"s

Freezing foodFresh food should be frozen as quicklyas possible. This helps maintain thenutritional value, vitamin content,appearance and taste of the

DefrostingFrozen food can be defrosted indifferent ways:–in a microwave oven,–at room temperature,–in the refrigerator (the cold given offby the froze

Freezing tips–The following are examples of foodssuitable for freezing:Fresh meat, poultry, game, fish,vegetables, herbs, fresh fruit,pastry/dough, le

IMPORTANT SAFETY INSTRUCTIONS...4Guide to the freezer ...8Before use ...

When the SuperCool function isactivated, the appliance is cooled ascold as possible (to a factory-presettemperature).SuperCoolThe SuperCool function i

For the automatic ice cube maker tooperate, it must be connected to thehousehold water supply. See"Plumbing".Turning on the ice cube maker^M

The freezer defrosts automatically.The moisture generated in theappliance collects in the evaporator. Itis automatically defrosted anddissipated by th

Moving the shelvesThe shelves can be adjusted accordingto the height of the food.^Using both hands, grasp the shelffrom underneath and lift slightly s

Ice cube containerThe ice cube container is set ontelescopic tracks, and can be removedfor loading, unloading and cleaning.^Slide the container forwar

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unp

Before cleaning^Use the main switch to turn theappliance off completely.The main switch is located on the rightside underneath the control panel.^Unpl

Ventilation slits^Check the ventilation slits in the basepanel regularly. Remove anydirt/dust with a vacuum cleaner orbrush. Clean as needed.Door seal

Changing the light bulbThe lighting automatically switches offafter the door has been open forapprox. 5 minutes. This is not a fault.After the bulb ha

Side lighting^Turn the light cover counterclockwiseand pull out.Never touch a halogen bulb withbare fingers.When inserting a glass halogen bulbalways

After sales service ...42Caring for the environment...44Installatio

The Appliance is supplied with anactive charcoal filter which improvesthe taste and smell of ice cubes byremoving chlorine and othersubstances from th

Exchanging the water filterNote: Air trapped in the system maycause water and the filter cartridgeto eject forcefully. Use caution whenremoving.^ Push

^After the filter change the filterindicator in the display still flashes.The change must be be confirmed inthe electronic.Confirming the filter chang

Water filter33State of CaliforniaDepartment of Public HealthWater Treatment DeviceCertificate NumberDate Issued: March 10, 2006Trademark/ModelDesigna

Water filter34To a capacity of 739.68 gallons (2800 liters).* Based on the use of Cryptosporium parvum oocystsPerformance Data Sheet For Filter Model

This product F 1411 Vi (KIMSDF18US) is tested and certified by WQA againstORD0902 for California "lead free" compliance.Miele & Cie. KGC

With the aid of the following guide minor problems can be corrected without a ser-vice call.Repairs should only be carried out by a qualified and trai

General problemsIssue Possible fault SolutionWater is flowing out ofthe appliance.Close the shut-off valve immediately.Check whether the waterpipe in

Alarm / Indicator warningsIssue Possible fault SolutionThe alarm is going off. The appliance door(s)have been open forlonger than 5 minutes.Close the

Problems with the ice makerIssue Possible fault SolutionThe ice cube makerwill not switch on.The appliance is notplugged in.Check that the appliance i

When using the appliance, followbasic safety precautions, includingthe following:Read all instructions beforeinstallation and use to preventaccidents

Problems with the ice makerIssue Possible fault SolutionThe ice cubes aresmall.Other domestic appliancesthat use water are inoperation.Avoid using suc

Problems with the ice makerIssue Possible fault SolutionThe ice maker is notproducing enough iceor the ice cubes aremisshapen.Check the waterpressure.

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this bo

Installation instructionsInformation is subject to change. Please refer to our website to obtain the mostcurrent product specification, technical &

Disposal of packing materialsThe cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle.Ensure that any plastic wrappings,

Have the appliance installed by aqualified technician, according tothe enclosed installation instructions.WARNINGThis appliance is top-heavy andmust b

BaseA fully loaded appliance is very heavy.The load-bearing capacity of your floormust meet the following requirements.The approx. weight of a fully l

Stainless steel panelsStainless steel door panels and toe-kickcovers are available from Miele.Custom door panelsThis appliance is compatible with alls

Installation with partition using the"Merging Kit"The minimum thickness of the partitionis5/8" (16 mm).If there is a partition with a t

Door dimensions (open 115°)AB CDF 1411 Vi 2011/16"(525 mm)Door front max.1 1/2" (38 mm)Doorhandle93/16"(234 mm)The dimensions of the do

InstallationThis appliance is top-heavy andmust be secured to prevent thepossibility of tipping forward.Keep the door closed until theappliance is com

Niche dimensionsNiche width (A)F 1411 Vi 18" (457 mm)Dimensions50

Power supply and water connection1. Power supply2. Water connectionAF 1411 Vi 9" (229 mm)Door front dimensionsABF 1411Vi 797/8"(2029 mm)173/

Before you beginRead these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed instal

Aligning the housing unitThe housing unit must be carefullyaligned using a spirit level beforeinstalling the appliance. The unitcorners must be at rig

^Do not remove the installationsupports from the appliance door.They will be used later in theinstallation niche.There are transportation safetydevice

^Push the module into the slot until itlocks into place.^Connect the appliance to the powersupply and turn it on. After severalseconds the indicator l

Mounting AccessoriesThe mounting accessories needed forinstalling the appliance into the nicheare included in the packaging. Severalplastic bags are i

^Drill pilot holes:–1/8"(3mm)for5x60mmwoodscrews–1/16"(2mm)for4x15mmwoodscrews.^ Tightly secure the anti-tip brackets inthe niche.Be certain

Securing an alternative anti-tipdeviceIf the anti-tip brackets cannot beattached securely, an alternativeanti-tip device can be used.Ensure that there

Sliding the appliance into thenicheIf a side-by-side installation isdesired, connect the two appliancestogether. See the Installation Manualincluded w

~Persons who lack physical, sensoryor mental abilities, or experience withthe machine should not use it withoutsupervision or instruction by aresponsi

Aligning the appliance^Align the appliance with the customfront.The installation aids e on theappliance door have been designed forcustom door thickne

Attaching the appliance to theinstallation niche^ Screw the attachment plate lugs h tothe overhead furniture/fixtures.If there is no way to attach the

For a side-by-side combination the fillerstrips from both appliances are puttogether to form one long filler strip:^Take the peg from the "Side-b

Preparing the custom door^Open the appliance door.^Unscrew the installation supports nfrom the appliance door.^ Loosen the remaining screws fromthe st

^ Mark the distance X on the back-sideof the custom door.^ Also calculate and mark the center ofthe custom door Y.^ Remove the mounting frame from the

Attaching and aligning thecustom door front^ Open the door and hang the customdoor with the mounting frame overthe threaded bolts p.^ Put the side str

Attaching the covers^ To mount the cover strips on bothsides of the door, click them intoplace from bottom to top, into thegap between the appliance d

Attaching the toe-kick coverThe maximum height of the toe-kickcover is 4" (102 mm) from the top ofthe floor. Do not cover the ventilationslits in

Mounting the air separatorThe air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, opti

All plumbing work should be carriedout by a suitably qualified andcompetent person, in accordancewith all applicable local and nationalregulations.The

Disposal of your old appliance~Before disposing of an oldappliance, first make the door latch orlock unusable.~Take off the door.~Leave the shelves in

Preparing the water connectionThe connection to the householdwater supply must be installedbefore the appliance is installed.^Turn off the main water

Connecting the water supplyWhen connecting the water pipe tothe solenoid valve of the appliance,follow the instructions supplied bythe manufacturer of

,Avoid the risk of electricalshock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension

Miele's RemoteVision Wi-Fi technologycreates a 'virtual link' between yourappliance and our monitoring center. Ifa fault occurs, Miele&

Accessing the RemoteVisioncontrol panel^Touch the access button "p"soitturns yellow.^Note the position of the X button, butdo not touch.^Tou

MasterCool control panel options for RemoteVisionStatus indicators Description of functionFlashing ; ~ Module booting phaseFlashing ; ‡ Not connected

Alteration rights reserved / 3712INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOSTCURRENT PRODUCT SPECIFICATIONS, TECHN

a Door shelves (height adjustable)b Shelves (height adjustable)c Ice cube makerd Ice cube containere Control panelf Main switch to turn the applianceO

Control panela Access button "p"b Temperature displayX colder; Y warmerAllows you to set the desiredtemperature in the freezerc On/Off senso