Miele GAS COMBISET CS 1011 Operations Instructions download pdf (Page 23)

Burner

Do not clean any parts of the burner

in a dishwasher.

The burner should be dismantled and

then cleaned by hand using a solution

of warm water and a small amount of

washing-up liquid applied with a soft

sponge.

Parts of the burner that cannot be

removed should be wiped clean with a

damp cloth only.

The ignitor and ignition safety device

should be very carefully wiped clean

using a well wrung out cloth.

Do not let the ignitor get wet. If it gets

wet it will not spark.

After cleaning dry all surfaces with a

clean cloth.

Make sure that the flame slits are clean

and completely dry.

The surfaces of the two burner caps

will become more matt with time. This

is quite normal and will not affect the

operation of the cooktop.

Reassemble the burner

After cleaning the burner it must be

reassembled in the correct order.

^

Place burner head j on to burner

base m so that the the ignition safety

device k and the ignitor l extend

through their respective holes in the

burner head. The burner head must

click into place correctly.

^

Place burner ring i in position.

^

The place burner cap g and h in

position.

Cleaning and care

23

1 ... 22 23 24 ... 52

Comments to this Manuals

No comments