Miele KM 5993 User Manual download pdf (Page 19)

Sensor switches

The control panel on your ceramic

cooktop is equipped with electronic

sensor switches. They respond to finger

contact.

To operate the cooking zones, simply

touch the corresponding sensor

switches. Every response of the sensor

switches is acknowledged with an

acoustic signal.

Take care to touch only the desired

sensor switch in the middle with your

finger vertical, and keep the control

panel clean with nothing placed on

top of it. Otherwise, the sensor areas

may not respond, or unintentional

commands may be given, even

causing the cooktop to automatically

switch off (see the section on "Safety

Switch-Off"). NEVER place hot

cookware on the sensor switches.

The electronic unit underneath might

be damaged.

Switching on

Begin by switching on the cooktop,

then the desired cooking zone.

Do not leave the appliance

unattended during operation!

Switching on the cooktop

^

Tap the ON/OFF sensors.

A 0 appears in each of the cooking

zone displays, while 00 appears in the

Timer/Memory display. If no further

information is entered within the next

few seconds, the cooktop will shut off

for safety.

Switching on the cooking zone

^ By touching the - or + sensor

switches, select the desired power

setting between 1 and 12 or the

keeping warm function.

If you begin with -, you select cooking

with Auto heat (see "Auto heat"). If you

begin with +, you select cooking

without Auto heat.

If you would like to switch on another

cooking zone, for which the 0 has

already gone out, briefly press - or +

once. The 0 appears, and you can

select a power setting (with or without

Auto heat).

Operation

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comments to this Manuals

No comments