Miele KM 5993 User Manual

Operating and installation instructionsCeramic hobs with inductionKM 5987 / KM 5993 / KM 5997To avoid the risk of accidents ordamage to the appliance

Technical safety~Before installation, check theappliance for visible signs of damage.Do not install and use a damagedappliance, it could be dangerous.

~Faulty components must only bereplaced by genuine Miele originalspare parts. The manufacturer can onlyguarantee the safety of the appliancewhen Miele

~For added protection, it is advisableto use heat-resistant pot holders orgloves when using the appliance. Donot let them get damp or wet, as thiscaus

~Do not allow either solid or liquidsugar, or pieces of plastic or aluminiumfoil to get onto the cooking zones whenthey are hot. If this should occur,

Disposal of the packingmaterialThe transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and

Please stick the extra data plate for theappliance supplied with thisdocumentation in the space provided inthe "After sales service, data plate&q

Calibrating the sensorsAutomatic calibrationTo ensure trouble free operation, thesensors–need to be recalibrated afterinstallation and each time theel

The induction principleAn induction coil is located under eachcooking zone. When a cooking zone isswitched on, this coil creates amagnetic field which

NoisesWhen using an induction cooking zone,the following noises can occur in thepan, depending on what it is made ofand how it has been constructed.–O

PansSuitable pans include:–stainless steel pans with a magneticbase–enamelled steel pans–cast iron pansUnsuitable pans:–stainless steel pans without a

Guide to the appliance ...4Hob ...4Control panel .

Sensor switchesThis hob is equipped with electronicsensor switches which react to fingercontact.To operate a cooking zone, touch therelevant sensor. E

SettingsSettings*Standardfactory settings(12 settings)Extendedsettings**(23 settings)Keeping warm h hMelting butterDissolving gelatine1-2 1-2.Warming

Auto heat-upWhen Auto heat-up has been activated,the cooking zone switches onautomatically at the highest setting andthen switches to the continued co

To activate Auto heat-up^Switch the cooking zone on bytouching the - sensor switch until thecontinued cooking setting yourequire appears in the in the

Booster functionThe cooking zones are equipped withSingle (l) or Twin Boosters (I/II) (see"Guide to the appliance").When activated, the powe

To activate Booster l^If necessary, switch on the requiredcooking zone.^Touch the B sensor for the relevantcooking zone.I will show in the cooking zon

Keeping warmEach cooking zone has a keepingwarm function ("h"). The "h" function is inbetween the "0" setting and the&qu

Switching off and residual heatindicatorsTo switch off a cooking zone^Touch the - and + sensors for thezone you want to switch off at thesame time.A 0

TimerThe timer can be used for two differentfunctions:–To set the minute minder–To set a cooking zone to switch offautomatically.You can select a time

To switch a cooking zone offautomaticallyYou can set a time at the end of whicha given cooking zone will switch offautomatically. It is only possible

Safety features ...33Safety lock/System lock ...33Stop and Go

Memory functionThe settings used on a particularcooking zone from switching on rightthrough to switching off can berecorded as a Memory programme. Upt

Using a Memory programmeThe same pan must be used in order toobtain the same cooking result as whenthe programme was recorded. Thequantity and size of

Using the Timer and Memoryfunction at the same timeIf you wish to use the minute minder atthe same time as another function:Touch the m sensor until t

Safety lock / System lockKeep children away from the hob fortheir own safety.Your appliance is equipped with aSafety lock to prevent the hob and theco

Stop and GoYour appliance has a Stop and Gofeature which, when activated, reducesthe power of all switched-on cookingzones to setting 1. When Stop and

Safety switch-offYour hob is fitted with a safetyswitch-off feature in case you forget toswitch it off yourself.Safety switch-off with an over-longcoo

Overheating protectionAll the induction coils and the coolingelements for the electronics are fittedwith an overheating protectionmechanism. To preven

A range of Miele branded cleaningproducts is available from Miele. See"Optional accessories" for details.,Do not use a steam cleaningapplian

Ceramic surfaceWipe all coarse soiling off using adamp cloth. Stubborn soiling may needto be removed with a shielded scraperblade.Then clean the hob w

You can change the default settings ofthe programme options (see chart).^With the hob switched off, touch thehob ON/OFF sensor s and the safetylock se

Hobac Cooking zones with Twin Boosterbde Cooking zones with Single BoosterGuide to the appliance4

Programme* Status** SettingP0Demonstration mode andfactory default settingsS 0 Demonstration mode onS1 Demonstration mode offS 9 Factory default setti

Programme* Status** SettingP6Lock S0 One-finger locking using $S 1 Three-finger locking using $ and+ on the two right-hand cookingzonesP7System lock S

Installation work and repairs toelectrical appliances must only becarried out by a suitably qualifiedand competent person in strictaccordance with cur

... one of the following has occurred:–The Booster has deactivated earlyautomatically.–The set power level 10, 11 or 12 isalternating in the display w

Miele appliances are designed to give the best possibleresults and many years of satisfaction. To help you get themost from your appliance, Miele has

The appliance must only be installedand connected to the electricitysupply by a suitably qualified andcompetent person in strictaccordance with curren

Safety distance above the applianceA minimum safety distance must bemaintained between the appliance andthe cooker hood above it. See thecooker hood m

Safety distances to the sides andback of the hobIdeally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear

Safety distances underneath the hobTo ensure sufficient ventilation to thehob, a certain gap must be left betweenthe underside of the hob and any oven

Safety distance when installing the appliance near a wall with additionalniche claddingA minimum safety distance must be maintained between the workto

Control panelSensor switchesa For setting the power levelb Boosterc For setting the timer, changing between functions, and selecting a cookingzonee Sa

Building-in dimensionsKM 5993a Frontb Building-in depthc Building-in depth, including mains connection cabled Mains connection cable, L = 1440 mme Con

InstallationPreparing the worktop^Make the worktop cut-out accordingto the dimensions given in thebuilding-in diagram. Remember tomaintain the minimum

General installation tipsSealantDo not use any sealant unlessexpressly instructed to do so. Thesealing strip under the edge of the toppart of the appl

Building-in dimensionsKM 5987a Frontb Building-in depthc Building-in depth, including mainsconnection cabled Stepped cut-out for granite or marblework

KM 5997a Frontb Building-in depthc Building-in depth, including mainsconnection cabled Stepped cut-out for granite or marbleworktopse Mains connection

InstallationFlush fit hobs are only suitable forinstallation in granite, marble, tiled orsolid wood worktops. Othermaterials such as Corian andAskilan

Making the worktop cut-out andbuilding in the hobGranite and marble worktopse Worktopf Hobg GapAs the ceramic glass and theworktop cut-out have a cert

Solid wood and tiled worktopsa Wooden frame 7,5 mm(to be provided on site)e Worktopf Hobg GapAs the ceramic glass and theworktop cut-out have a certai

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regula

The electrical safety of this appliancecan only be guaranteed whencontinuity is complete between it andan effective earthing system, whichcomplies wit

Cooking zone displaya Displays:0 = Cooking zone ready for use^ = Keeping warm function1 to 12 = Power levelsI = Single Booster III = Twin Booster II#

Wiring diagramN.B. This appliance is supplied single phase only in the U.K. / AUS / NZElectrical connection60

In the event of any faults which you cannot remedy yourself, or if the appliance isunder guarantee, please contact:–Your Miele dealer, or–the Miele Se

62

63

Alteration rights reserved / 0510M.-Nr. 07 257 460 / 07

Cooking zonesCookingzoneKM 5987 / KM 5993 / KM 5997Minimum to maximumC in cm*Rating in watts for 230 V**y 16 - 23 Normal:With Single Booster I:With Tw

This appliance complies with allrelevant local and national safetyrequirements. Improper use of theappliance can, however, present arisk of both perso

Safety with children~Use the safety lock to preventchildren operating the appliance oraltering the settings.~Keep children away from theappliance at a