Miele KM3054 Installation Manual download pdf (Page 46)

All electrical work should be carried

out by a suitably qualified and

competent person, in strict

accordance with current local and

national safety regulations (BS 7671

in the UK).

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer

cannot be held liable for

unauthorised work.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

The appliance must only be

operated when built-in. This is to

ensure that all electrical parts are

shielded. Live parts must not be

exposed.

Do not connect the appliance to the

mains electricity supply by an

extension lead. These do not

guarantee the required safety of the

appliance.

Please make sure that the connection

data quoted on the data plate match

the household mains supply.

Connection should be made via a

suitable isolator or a double pole fused

spur connection unit which complies

with national and local safety

regulations and the on/off switch should

be easily accessible after the appliance

has been built in.

If the switch is not accessible after

installation (depending on country) an

additional means of disconnection must

be provided for all poles.

For extra safety it is advisable to protect

the appliance with a suitable residual

current device (RCD).

When switched off there must be an

all-pole contact gap of 3 mm in the

isolator switch (including switch, fuses

and relays).

Important UK

This appliance is supplied for

connection to a single phase 230 V

50 Hz supply with a 3-core cable.

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue = neutral

Brown = live

WARNING

THIS APPLIANCE MUST BE

EARTHED

Electrical connection

46

1 ... 45 46 47 ... 60

Comments to this Manuals

No comments