Miele M 336 EG User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
Controls
Multitronic Novo Vario
Programmes
• 3 standard cleaning programmes
Programme Control
• Single switch control knob
Display
• Programme sequence display
• Temperature and programme duration
Programme end, optical and acoustic
signal
• Service and fault check lights
Interface
• Optical interface for service technician
G 7804 controls
Programme When to use
Pre-wash Main wash
1
) Rinse 1 Rinse 2
2
) Final rinse
1
) Drying
(optional)
A
SHORT
For laboratory utensils and glassware with light water soluble
contamination.
This programme does not include a pre-wash or neutralisation.
The final rinse is carried out with de-ionised (AD) water.
X
DOS 1
70°C / 5’
(X)
DOS 3
(AD)
X
70°C / 3’
AD
(DOS 2)
(X)
B
MEDIUM
For normally soiled laboratory utensils and glassware where the
contamination is soluble in water or at higher temperatures where
alkaline.
This programme does not include a pre-wash.
The final rinse is carried out with de-ionised (AD) water.
X
DOS 1
70°C / 5’
X
DOS 3
(X)
(AD)
X
70°C / 3’
AD
(DOS 2)
(X)
C
LONG
For heavily soiled laboratory utensils and glassware where the
contamination is soluble in water or at higher temperatures where
alkaline.
This programme includes a pre-wash and neutralisation.
The final rinse is carried out with de-ionised (AD) water.
X X
DOS 1
70°C / 5’
X
DOS 3
(X)
(AD)
X
70°C / 3’
AD
(DOS 2)
(X)
DRAIN
For draining water out of the machine, e.g. when a programme
has been interrupted. Turn the programme selector to the STOP
position
first!
PRE-RINSE
For rinsing heavily soiled items (e.g. for removing soiling or
disinfectant residue or to prevent soiling drying on to glassware
when a complete programme does not yet need to be run).
X
Programme chart
X = Sections included in a programme
1
) Temperatures/temperature holding times in the main wash and final rinse stages can be used
to suit user requirements
2
) Rinse 2 has to be activated by the user if required. The machine can be programmed by a
service technician to use AD water for this rinse if required.
DOS 1 = For dispensing cleaning agent
DOS 2 = For dispensing rinsing agent
DOS 3 = For dispensing neutralising agent
AD = Aqua destillata (programmable for Rinse stage 2)
Page view 3
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments