19
G 7827 and G 7828
The modular machine concept
18
Unit 2
Plinth/drip tray SBW
H 100/W 1134/D 854 mm
Electrical, steam and plumbing in-
stallation facilities can be fed through
the plinth.
Unit 1
Washer disinfector
G 7827 or G 7828
H 1560, W 1150, D 870
Illustration: G 7828 with plinth from the “unclean side”
Illustration: G 7828 with plinth and drying unit from the “unclean side”
Unit 3
TA Drying unit
● Hot air drying unit for fast thorough
drying of internal and external sur-
faces.
● Heating: Steam or electric
● Three phase motor with side channel
connection, brushless for long
service-free life
● Temperature setting from
60°C-115°C
● Freely adjustable time setting from
3–240 mins.
● 1 pre-filter class EU 4, filtration level
> 95%, filter life 200 hours
● 4 particle filters EU13, filtration level
> 99.992%, filter life 500 hours
The frame for fitting the hot air drying
unit to the washer disinfector is sup-
plied as standard.
Module 4 (optional)
DK steam condenser
Water cooled heat steam condenser as
heat exchanger. Can be connected to
on-site cooling water circuit, hence no
added water consumption. Can be fit-
ted in the frame of the hot air drying
unit TA.
Module 5 (optional)
Printer for process documentation.
Module 6 (optional)
MAV/2 installation kit
Stainless steel top panel for the frame
of the TA/DK with service doors on the
clean and unclean sides, including air
vents on the unclean side. The service
doors can be locked.
Dimensions:
H 759, W 1150, D 765 mm.
Diaphragm wall panelling between the
top of the machine and the ceiling
must be fitted on site.
Not illustrated:
Module 7 (optional)
Double drain valve
Illustration: G 7828 on plinth, with drying unit, steam condenser and integrated printer, seen from the “clean side”
Illustration: G 7828 on plinth with MAV installation kit, seen from the “unclean side”
Comments to this Manuals