Miele KFN 8992 SD ED User Manual download pdf (Page 27)

For the automatic ice cube maker to

operate, it must be connected to the

household water line.

Switching the ice cube maker

ON

^

Switch the freezer ON.

^

Open the top left drawer in the

freezer section.

^ Press the ON/OFF button, and the

indicator light will now come on.

^ Close the drawer.

The drawer must be completely shut

for ice cubes to be produced.

After the appliance is turned on for the

very first time, it can take up to 24 hours

for the first ice cubes to drop out of the

ice cube maker and collect in the

drawer. Thereafter, when the ice cube

maker is switched off and then on again

it will take a maximum of 6 hours for ice

to be produced.

To ensure that the water pipes are

thoroughly flushed through, you

must not consume the first three

batches of ice from the ice maker.

This applies not only when the

appliance is first being used after

installation, but also if it has been

out of use for a longer period of time

(for example, after being away on

holiday).

Making a large amount of ice cubes

The amount of ice cubes made

depends on the temperature in the

freezer section. The lower the

temperature, the more ice cubes are

produced within a given period of time.

Once the ice cube drawer is full, ice

cube production is automatically

halted.

If you require a large amount of ice

cubes,

^ replace the full ice cube drawer with

the drawer beside it on the right.

Once the empty drawer has been

placed in position and closed properly,

the ice cube maker will begin to

produce new ice cubes again.

Making ice cubes (may vary by model)

27

1 ... 26 27 28 ... 48

Comments to this Manuals

No comments