Miele KFN 9753 iD EN User Manual download pdf (Page 31)

The alarm sounds.

Possible fault Solution

The appliance door(s) have been

open for longer than 60 seconds.

Close the door(s).

The alarm sounds and the temperature display of the freezer section

flashes.

The freezer door has been opened

too frequently.

This has caused the temperature in the

freezer to rise above the set temperature.

Once the temperature has dropped to the

correct level again the alarm will stop and

the display will stop flashing.

A large amount of food is being

frozen at the same time.

Bars light up or flash in the temperature displays.

Only temperatures within the range of the appliance can be shown in the

display. Check the display again about 6 hours after turning it on.

A fault code of "F0"to"F5" appears in one of the temperature displays.

A fault has occurred. Contact Miele Technical Service.

The Super indicator light of the freezer section and the temperature display

are both flashing.

A fault has occurred. Contact Miele Technical Service.

The Super indicator light of the freezer section is not on, but the refrigerator

is running.

The indicator light is faulty. Contact Miele Technical Service.

"nA" appears in the temperature display of the freezer section.

The temperature in the freezer

section has risen too high at some

point during the last few days

because of a power failure.

Press the alarm off button while "nA"islit

in the display.

The display will show the warmest

temperature reached in the freezer during

the power failure for about 1 minute. The

display will then revert to the current

temperature in the freezer section.

After the power failure the appliance will

continue running at the last temperature set,

there is no need to re-set.

Frequently asked questions

1 ... 30 31 32 ... 56

Comments to this Manuals

No comments

Miele KFN 9753 iD EN User Manual Page 31

Comments to this Manuals

Related products and manuals for Refrigerators Miele KFN 9753 iD EN