Miele S 290 series Operations Instructions download pdf (Page 8)

Technical safety

~

Before setting up the appliance,

check it for any externally visible

damage. Do not install and use a

damaged appliance.

It could be dangerous.

~

If the connection cable is faulty it

must only be replaced by a service

technician authorised by the

manufacturer to protect the user from

danger.

~

This appliance contains the coolant

Isobutane (R600a), a natural gas which

is environmentally friendly. Although it

is flammable, it does not damage the

ozone layer and does not increase the

greenhouse effect. The use of this

coolant has, however, led to a slight

increase in the noise level of the

appliance. In addition to the noise of

the compressor, you might be able to

hear the coolant flowing around the

system. This is unavoidable, but does

not have any adverse effect on the

performance of the appliance.

Care must be taken during the

transportation and installation of the

appliance that no parts of the cooling

system are damaged. Leaking coolant

can damage the eyes.

In the event of any damage:

- avoid open flames and anything which

creates a spark,

- disconnect from the mains,

- air the room in which the appliance is

located for several minutes and

- contact the Service Department for

advice.

~

The more coolant there is in an

appliance, the larger the room it should

be installed in. In the event of a

leakage, if the appliance is in a small

room, there is the danger of

combustible gases building up.

For every8gofcoolant at least 1 m

3

of

room space is required. The amount of

coolant in the appliance is stated on the

data plate inside the appliance.

~

Safe operation of the appliance is

only assured if it has been installed and

connected in accordance with these

operating and installation instructions.

~

Before connecting the appliance,

make sure that the connection data on

the data plate (voltage and frequency)

matches the mains electricity supply.

This data must correspond in order to

avoid the risk of damage to the

appliance. Consult a qualified

electrician if in any doubt.

~

Do not connect the appliance to the

mains electricity supply by a

multi-socket adapter or an extension

lead. These do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

Warning and Safety instructions

8

1 2 3 4 5 6 7 8 9 ... 48

Comments to this Manuals

No comments