Miele H 357 Service Manual download pdf (Page 32)

^

Then flush the unit through from the

front.

^ Check the heat exchanger unit again

for any visible fluff and if necessary

flush it through again until it has all

gone.

^ Shake any excess water out of the

unit until no more water droplets are

visible.

^ Remove any soiling still visible inside

the housing unit by hand using and

damp cloth. Do not try and access

areas you cannot reach by hand!

^

Also make sure the rubber seals are

clean.

The rubber seals must not be

removed and must be free of kinks.

Replacing the heat exchanger unit

^

With the handle facing upwards,

push the heat exchanger unit back

into position in its housing.

^

Turn the lever down to the horizontal

position, making sure that the hook

on the lever clicks into the groove.

When replacing the cover after

cleaning, ensure that the rubber seal

fits correctly into the groove.

^

Replace the cover making sure the

hooks locate correctly. Hold it at an

angle and push it gently downwards.

^

Then turn the lever upwards into the

horizontal position to lock the cover.

^

Replace the service panel and press

the upper edge until it clicks into

position.

,

It is important to ensure that both

the heat exchanger unit and the

cover are correctly positioned and

locked otherwise water may leak

from the machine.

Cleaning and care

32

1 ... 31 32 33 ... 56

Comments to this Manuals

No comments