Miele T 1520I VENT ED DRYER - OPERATING Operations Instructions download pdf (Page 25)

Installation site

,

Make sure the dryer door can be

opened without hindrance after

installation.

Transporting the machine to its

installation site

When moving the machine you can

hold it by the lid where it protrudes to

the rear of the dryer. To manoeuvre the

dryer out of its packing case to its

installation site you will also need to

hold it by the front feet.

Building under a continous worktop /

in a kitchen run

The space required by the vent duct

must be taken into consideration when

calculating the distance between the

machine and a wall or other machines

or furniture on either side.

,

A building under kit* is required

which must be fitted by a suitably

qualified person.

The machine lid is replaced by a

coverplate. It is essential that the

coverplate is fitted to ensure

electrical safety.

–

When installing under a 900/910 mm

high worktop a spacer kit* is

required.

–

Flat ducting* is required if there is not

enough space for a ventilation

ducting hoses or pipes.

–

The electrical socket must be

located in an accessible position

near the machine.

* Available as an optional accessory

from your Miele dealer or the Miele

Spare Parts Department.

The building under kit is supplied with

its own installation instructions.

N.B. When built under drying times may

be longer.

Replacing the lid

If the lid has been removed in order to

fit a cover plate, ensure that, if the lid is

replaced, it fits securely into the rear

holders. Otherwise, it is not properly

secure for transport.

Installation

25

1 ... 24 25 26 ... 48

Comments to this Manuals

No comments