Miele T 5205 C Operations Instructions

Browse online or download Operations Instructions for Tumble dryers Miele T 5205 C. Miele T 5205 C Operating instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Operating and Installation instructions
for Condensor Tumble Dryer
T 5205 C
It is essential to read these
operating instructions before
Q
installing or using the machine,
to avoid the risk of accident
or damage to the machine. M.-Nr.: 04 076 300
Page view 0
1 2 ... 36

Summary of Contents

Page 1 - T 5205 C

Operating and Installation instructionsfor Condensor Tumble DryerT 5205 CIt is essential to read theseoperating instructions beforeQinstalling or usin

Page 2 - Contents

Preparation of laundryWash care labelsBefore drying check the dryingsymbol on the wash care label.Significance of symbols:q = Dry at normal temperatur

Page 3

Programme chart Programme Laundry / Fabric type max.load1)NotesACOTTONS1Extra dryMulti-layered fabricswhich would not bethoroughly dried usingthe 2 No

Page 4 - Technical safety

Programme Laundry / Fabric type max.load1)NotesBMINIMUM IRON7Normal +Minimum iron itemsmade of synthetics orblended fabrics, e.g.pullovers,dresses,tro

Page 5 - ~ r Anti-crease

How to dry correctly1 Prepare the laundryAs far as possible, sort laundry for:– the type of fibre or weave– the degree of dryness required,– similar s

Page 6 - Disposal of your old machine

3 Select a programmeTurn the programme selector to theprogramme required.Select low temperature L if required.If the machine is fitted with a coinmech

Page 7 - Energy saving tips

Changing a programmeTo cancel a programmeTurn the programme selector switchto the r End position.For safety reasons all programmeswhere the residual m

Page 8 - Guide to the machine

Cleaning and careCleaning the fluff filtersThe fluff which occurs during dryingis collected in the fluff filters in thedoor and in the door opening.Cl

Page 9

Casing and drumDisconnect the machine from themains electricity supply.Avoid contact of stainless steel sur-faces (front, lid, casing) with liquidclea

Page 10 - Preparation of laundry

Heat exchangerThe heat exchanger should be cleanedat least four times a year.Before cleaning disconnect the machine from the mains electricitysupply.T

Page 11 - Programme chart

Pull out the heat exchanger.Clean the heat exchanger at bothends (front and back).and along the two long sides.Wipe the rubber seals at both endsgentl

Page 12

ContentsWarning and safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Help to protect the environmentDi

Page 13 - How to dry correctly

Problem solving guideWhat to do if . . . ?With the help of the following notes minor faults in the performance of themachine, some of which may result

Page 14

Fault Possible cause RemedyDrying times aretoo long.The fluff filters and / or theheat exchanger might beclogged up.– Clean as described in“Cleaning a

Page 15 - Changing a programme

Fault Possible cause RemedyThe drum door opensduring a programme.The machine hasoverheated. Thetemperature limiter opensthe drum door causing themachi

Page 16 - Cleaning and care

Fault Possible cause RemedyThere is a build up offluff.Fluff comes off textilesnaturally during wearingand washing. The fluff thatcollects in the filt

Page 17

To change the lampDisconnect the machine from themains electricity supply.Open the door.Unscrew the plastic cover inside thedrum, above the door.The l

Page 18

ServiceIn the event of any faults which cannotbe remedied, or if the machine is underguarantee, please contact– Your Miele Dealer or– The nearest Miel

Page 19

Installation View from the front1 Mains supply socket 2 Coin mechanism (optional)3 Control panel 4 Door 5 Service panel6 External drainage options for

Page 20 - Problem solving guide

View from the rear1 Cable connection point forcoin mechanism / time counter 2 a.c. connection cable (approx. 2 m long)3 Drain socket for condensed wat

Page 21

Aligning the machineThe machine must be perfectly level toensure safe and proper installation.The screw feet can be adjusted tocompensate for any unev

Page 22

Electrical connection Electrical connection U.K.All electrical work should be carried outonly by a suitably qualified and compe-tent person, in strict

Page 23

Cleaning and careCleaning the fluff filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Casing and d

Page 24

Non-rewireable plugs BS 1363If this machine is fitted with a non-re-wireable plug, the following informationapplies:If the socket outlets are not suit

Page 25

External drainage of the condensed waterThe condensed water can be drainedoff directly if the machine is installednear a sink, drain outlet, gully etc

Page 26 - Installation

Technical data Height 85.0 cm(adjustable +1/-0.5 cm)Width 59.5 cmDepth (incl. distance from the wall) 70.0 cmWeight 60 kgDrum volume 126 litres Capac

Page 30

Alteration rights reserved/006 3499This paper consists of cellulose which has been bleached without the use of chlorine.

Page 31 - Accessories supplied:

Warning and safety instructionsPlease read the operating instruc-tions before using the tumble dryerfor the first time. They contain im-portant inform

Page 32 - Technical data

In the event of a fault or for clean-ing purposes, the machine is onlycompletely isolated from the electricitysupply either when:– the plug is withdra

Page 33

There is a danger of fire with fab-rics which:– contain rubber, foam rubber or rub-ber like materials– have been treated with inflammablecleaning agen

Page 34

Help to protect the environmentDisposal of the packingmaterialThe transport and protective packinghas been selected from materialswhich are environmen

Page 35

Guide to the machine Control panelPushbutton switchesaDoorOpens the drum door n LightIlluminates the drum L Low temperatureLower drying temperatures (

Page 36

Explanation of control panelA small panel is supplied with the ma-chine to explain the symbols on thecontrol panel. Position this on the lefthand side

Comments to this Manuals

No comments