The system lock prevents the dryer
being used without your knowledge.
It can be activated if wished.
The dryer's electronics are then locked.
The dryer can still be switched on but a
programme cannot be started.
–
If an attempt is made to start a
programme, the indicator light for the
Low temperature button will come on
and a key symbol 0-§ will appear in
the display.
The door is not locked and can be
opened at any time.
To activate the lock
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
A Press the Low temperature button
and keep it pressed in whilst carrying
out steps B to E.
B Press the jk button in.
The Automatic indicator light will come
on.
C Slowly turn the programme selector
three positions stage by stage in a
clockwise
direction.
Each of the three programme
indicator lights must come on one
after the other.
D Now slowly turn the programme
selector six positions stage by stage
in an anti-clockwise
direction.
Each of the six programme indicator
lights must come on one after the
other.
The indicator light for the Low
temperature button will flash and a key
symbol 0-§ will appear in the display.
E Release the Low temperature button.
The electronics have now been locked.
^
Switch the dryer off.
To deactivate the lock
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
^ The procedure is the same as for
activating the lock. Carry out steps A
to E as described previously.
At step E the indicator light for the Low
temperature button will stop flashing
and the key symbol 0-§ will go out.
The electronics are no longer locked.
Electronic system lock
24
Comments to this Manuals