Miele T8722 Operations Instructions download pdf (Page 53)

Standby

To save energy, the display and the

programme sequence/check lights

go out after 10 minutes and the

Start/Stop button starts flashing

slowly.

To come out of standby mode

^

Turn the programme selector or

press a button. Neither will have any

effect if a programme is running.

Factory default

The standby function is activated and

the display and programme

sequence/check lights will go out after

10 minutes:

– if a programme is not selected after

the dryer has been switched on.

– after a programme has started.

They will, however, come on for 10

minutes after a delay start time has

counted down, at the end of the

programme or the end of the

anti-crease phase.

The buzzer (if selected ) will sound for

10 minutes at the end of the

programme.

Instead of the factory default setting

you can select another option:

Not in current programme

As described under "Factory default"

above.

However, the display and programme

sequence/check lights will stay on after

the programme has started and remain

visible during the programme.

Off

The display and programme sequence/

check lights will stay on while the dryer

is switched on.

Follow the steps (A,B,C ...) to

programme and store in memory.

^ See next page.

Programmable functions

53

1 ... 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments