Miele KFN 14943 SD ED User Manual

Operating and InstallationInstructionsFridge-Freezer CombinationKFN 14943 SD edTo prevent accidentsand machine damageread these instructionsbeforeinst

^Push the pin e up and out.Now the soft-close mechanism and theappliance are no longer connected.^Remove the panel a.^Push the shock absorber arm f as

^ Lift the plugs l out of the doorbearing bushing in the appliancedoor and place it on the other side.Mounting the bottom door of theappliance:^Remove

^Put the bearing pin i in the middleof the appliance through the hingebracket k into the bottom door of theappliance.Mounting the bottom soft-closemec

^Hang the panel b on the shockabsorber arm d.^Pull the shock absorber arm dtowards the hinge bracket and insertthe pin e from the top so that thesquar

Mounting the top soft-closemechanism:^Remove the cover a from the panelb, turn it 180° and replace it on theother side.^Hook the spacer on the handle

^Remove the securing device g.^Place the panel b onto the soft-closemechanism from above, engaging itat the bottom first and then at the top.^ Close t

The appliance doors can be alignedwith the appliance housing afterwards.In the following figure, the appliancedoor is not closed so that theindividual

a adapter cabinetb appliancec kitchen cabinetd wallThe appliance can be installed in anyfitted kitchen. To match the applianceto the height of the fit

Subject to change without notice / 4709KFN 14943 SD edM.-Nr. 07 589 450 / 01

,Avoid the risk of electrical shock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extensio

Do not place any devices thatproduce heat (such as a toaster ormicrowave) on top of the appliance.This would increase the energyconsumption of the app

Adjustments^Use the wrench provided to adjustthe feet as needed, so that theappliance is level.^ If necessary, unscrew the foot afrom the hinge bracke

Appliance dimensionsABCKFN 14943 SD ed 2020 750 630Installation information48

The appliance comes with right-handhinging. If left-hand door hinging ispreferred, then follow these instructionsto change the door hinge:You will nee

Before changing the hinging,remove any items of food from theshelves in the appliance door.Removing the top soft-closemechanism:^Open the top door of

^Remove the cover d.Now the soft-close mechanism and theappliance are no longer connected.^ Remove the panel a.^ Push the shock absorber arm f asfar a

Caution! The top door of theappliance is no longer secured assoon as the hinge bracket isremoved when following theinstructions below!^Close the top d