Miele HS15 Operations Instructions download pdf (Page 8)

Do not use the vacuum cleaner if the cable is damaged. If the

cable is damaged it must be replaced together with a complete

cable rewind. For safety reasons this work must be done by the

Miele Service Department or a Miele authorised service technician.

When vacuuming especially fine dust, e.g. sawdust, sand,

plaster, flour, talcum powder etc., electrostatic charges build up

naturally. Under certain conditions these charges will be released.

To avoid the unpleasant effects of these discharges, a metal inlay

has been incorporated into the underside of the handle. Please

make sure that you keep your hand in constant contact with this

metal strip during vacuuming.

Do not let the vacuum cleaner get wet. Clean only with a dry cloth

or slightly damp cloth when disconnected from the mains supply.

Repairs should only be carried out by a Miele authorised service

technician. Repairs and other work by unqualified persons could be

dangerous. The manufacturer cannot be held liable for unauthorised

work.

Correct use

To avoid the risk of damage, do not use the vacuum cleaner without

the dustbag, dust compartment filter and exhaust filter in place.

If the dustbag is not fitted correctly, the dust compartment cover

does not normally close. Do not force it.

Important information on the handling of batteries:

–

Do not short circuit or recharge batteries, or throw them into a fire.

–

Disposing of batteries: Remove the batteries from the LED handle

and dispose of them in your recycling bin. Do not dispose of them

with the normal household waste.

Warning and Safety instructions

1 2 3 4 5 6 7 8 9 ... 36

No comments

Miele HS15 Operations Instructions Page 8